Email Aaron@6061.com with any questions regarding your order
UNITED STATES ORDERS ONLY
| Parameter | TIG225ACDCP | |
|---|---|---|
| Welding process |
AC/DC GTAW-P DC-SMAW |
|
| Inverter type |
IGBT |
|
| Input voltage | 1 phase AC, 110V +/- 15% | 1 Phase AC, 220V +/- 15% |
| Input frequency | 50/60Hz | 50/60Hz |
|
Input connector type Pre-wired for NEMA 6-50P *adapter provided for NEMA 6-50 to NEMA 5-15 (for 220V or 110V operations) |
5-15P NEMA *See note |
6-50P NEMA |
| Rated input current |
TIG: 34.0A MMA: 46.3A |
TIG: 33.3A MMA: 38.1A |
| Rated output voltage |
TIG: 15.6V MMA: 24.8V |
TIG: 19.0V MMA: 27.2V |
| Rated output current |
TIG: 140.0A MMA: 120.0A |
TIG: 225.0A MMA: 180.0A |
| No-Load voltage | 56.0V | |
| Arc initiation (TIG) | High-Frequency Start (HF start) | |
| Duty Cycle | See Duty Cycle Table | |
| No-load power consumption | 40W | |
| Efficiency | >=80% | |
| Power factor | 0.73 | |
| Insulation grade | F | |
| Ingress protection rating (IP) |
IP21 |
|
| Weight | 18.5 kg / 40.7 lbs | |
| Overall dimensions | 20.50 x 11.80 x 21.46 inches | |
| Remote control | 2T operation | |
| Breaker size | 50 amp 22v/30 amp 110v | |
| Welding process dependent | ||
| Starting current | 10A to 225A | |
| Ending current | 10A to 225A | |
| Current upslope | 0s to 10s | |
| Welding current | 10A to 225A | |
| Base current | 5% to 95% | |
| Pulse frequency |
Low: 0.5Hz to 10Hz High: 10Hz to 200Hz |
|
| Gas: Pre-Flow | 0.1s to 3s | |
| Gas: Post-Flow | 0s to 15s | |
| AC Frequency | 40Hz to 200Hz | |
| AC Balance | 10% to 90% | |
| Welding Type | Input Voltage | Duty Cycle |
|---|---|---|
| TIG | 110V | 140A/15.6V @ 40% |
| 124A/14.9V @ 60% | ||
| 108A/14.3V @ 100% | ||
| 220V | 225A/19V @ 40% | |
| 183A/17.3V @ 60% | ||
| 155A/16.2V @ 100% | ||
| Stick | 110V | 120A/24.8V @ 40% |
| 98A/23.9V @ 60% | ||
| 76A/23V @ 100% | ||
| 220V | 180A/27.2V @ 40% | |
| 162A/26.5V @ 60% | ||
| 139A/25.6V @ 100% |
*note: all values are at 25°C