Email Aaron@6061.com with any questions regarding your order
3-year manufacturer warranty
-Free Shipping (lower 48 states, email for shipping quote elsewhere)
-Steel MIG and aluminum MIG (spool gun sold separately), and stick welding capability
Specifications Table
| MIG285 | ||||
| IGBT type: | IGBT tube | |||
| Inverter Type: | Digital/ Micro-controlled, half-bridge | |||
| Output Type: | MIG, lift TIG, Stick | |||
| Voltage/phase: | 1phase-120V/240V | |||
| Max Rated MIG output Amps: | 285A | |||
| Max Rated TIG output Amps: | 250A | |||
| Max Rated Stick output Amps: | 250A | |||
| 240v | 120v | |||
| MIG Amps@Rated Duty cycle: | 30%285A | 30%120A | ||
| Stick Amps@Rated Duty cycle: | 30%250A | 30%120A | ||
| Tig Amps@Rated Duty cycle: | 30%250A | 30%120A | ||
| MIG | STICK | TIG | ||
| Max Inrush (I1MAX) Input Amps: | 120v | 34.2A | 42.5A | 25.3A |
| 240v | 57.4A | 53.5A | 35.7A | |
| Max Rated (I1eff) Input Amps: | 120v | 18.7A | 23.3A | 13.9A |
| 240v | 27.4A | 29.3A | 19.6A | |
| OCV: | MIG | 68V | ||
| STICK | ||||
| TIG | ||||
| MIG Output range: | 40-260A | |||
| Stick Output range: | 20-250A | |||
| Tig Output range: | 10-250A | |||
| Stick Hot Start Amps: | 0-200% | |||
| Stick Hot Start Time: | 0-2.0S | |||
| Stick Arc force Amps: | OFF-200% | |||
| Voltage reduction device | ON-OFF | |||
| Restore Factory Defaults | NO-YES | |||
| Stick E6010/Cellulose setting or capablity: | NO | |||
| MIG Operator Controls: | C25/C100 | FLUX | ALUM | |
| Wire Diameter | .024/.030/.035 | .035/.045 | 0.035 | |
| Pre Flow | 0-0.2s | |||
| Post Flow | 0-10.0s | |||
| Run In | 30-150% | |||
| Burn back | 0-1.0s | |||
| Wire Sharp | ON-OFF | |||
| Spot | OFF-ON | |||
| Spot Time | 0.1-20.0s | |||
| Stitch | OFF-ON | |||
| Stitch Time | 0.2-4.0s | |||
| Dwell Time | 0.1-1.0s | |||
| Wire Feed Speed Units | MPM-IPM | |||
| Restore Factory Defaults | No-yes | |||
| Machine alone size: | 25.67*11*18.11inches | |||
| Machine Weight: | 58.33lbs | |||
| Power Cable length: | 78.74inches |