Email Aaron@6061.com with any questions regarding your order
-Patent Pending
-6061.com "Finger Pedal" variable amperage TIG controller
-Works exactly like a foot pedal, plugs directly into the machine. Mounts on your torch handle. 26 foot length. 50 foot available upon request.
-Anodized billet 6061 CNC machined aluminum. Silver housings, black lever, colored dust cover matches brand of machine:
Miller 14 pin-blue
PrimeWeld-black/grey
Lincoln-red
HTP-black/grey
Everlast-green
Everything other brand (EMAIL ME FIRST BEFORE ORDERING)-black/grey
IMPORTANT-If your machine is not listed above, Please do not order below. Email me first to check compatibility.
Out of stock, please check back June 24th.
-Scroll down to read customer feedback
Customer reviews
----------------------------------------------------------------
"I have been using the “Finger Pedal” for a few weeks now. This is the answer for having control at the torch. I can feel the lever with gloves on before it comes on, and I can tell approximately where I’m at amperage wise by where the lever is (physical position opposed to just pressure). This thing is awesome, I’m even already running it right handed. Thanks So Much for creating this!"
Thanks Again Dave
----------------------------------------------------------------
"Works straight out of the box, Hella better than the stupid ass "thumb wheel" Im used to back at my old job. This has helped me be more consistent while easily adjusting the amps on my tiny tig machine at home. Never going back to the pedal after this. 10/10."
----------------------------------------------------------------
"I wanted to let you know I fucking love this finger pedal. All of it. And I wouldn't change a single thing about it. It fits my CK torch perfectly, it hardly adds any noticeable weight. More importantly, it is by far the most natural feeling - it feels like it belongs there. I don't even bother putting out my foot pedal anymore because this is already wrapped around my torch. I've tried a lot of different finger pedals - and every single one of them has had some kind of "learning curve" to it. I learned yours in less than a minute.
The only thing I have learned is to be a little more vigilant about where I lay to torch to avoid bumping the trigger on accident. Again, I would not change a single thing, its the best one on the market right now by a MILE. Cheers brother, you did great."
----------------------------------------------------------------
"I'm truly mind blown. Certified Trademan in Canada for 28 years this year and never have I used a product that changed my welding for the better haha. The control, dexterity, and simple fluidity of this Finger Pedal is next level HOLY FUCKBALLS! LOVE IT!"
----------------------------------------------------------------
"I've been having a blast with it personally, the phrase that comes to mind is "electric crayon" for me. I'm 45 and not a welder by trade, I was an IT guy (data stuff) for 20 years and now for career #2 I'm a shop teacher!
I had a bunch of the high school kids try it too, kids who were still learning together and pretty mid described it as "different" and something they'd have to get used to.
The over achievers that just tig weld for fun (and mindfulness I suspect) saw a huge difference on the dexterity difference between their foot vs finger.
They're dexterous enough with both where they're very good (consistent) with either, foot in or finger, but personally, learning as an older fella, I was instantly making more consistent welds, keeping a more consistent arc length, consistent speed, etc.
almost like I was able to stop trying to adjust things with the wrong levers since I had the right lever now."
-----------------------------------------------------------------
"Absolutely LOVE IT MAN! Home run here, I'm pushing this product in every contact and group I am part of, that's the best TIG innovation in probably 50 years!"
-----------------------------------------------------------------
"I am very pleased with your finger pedal. It is very well made, quite solid. Going to take some time to reorient myself to adjusting with my finger rather than the foot pedal but the convenience is so worth the effort.
Thank you for making the effort to build the finger pedal and make it available. I hope it works out well as a business for you."
Best Regards
------------------------------------------------------------------
"Short answer: you hit this one out of the park. I wouldn't change a thing."
------------------------------------------------------------------
"Hello,
I got my finger pedal and it works great. Most of my welding is tubing or tacking tubing/tabs together on chassis. The finger pedal is way more convenient than dragging the foot pedal into awkward angles. I did wind up using zip ties to help hold it in place more securely than the Velcro straps. There it is mounted in my ck17 with the valve. Thanks again"
------------------------------------------------------------------
"Its better than I really hoped for!
I'll tell you what you can run this just about any way you'd need.. the spring pressure on the lever is at such a sweet spot allowing handling the torch with perfect control and a little squeeze with whatever happens to be on the lever does it..silky heat control comes to mind..it was on the Dynasty 15min after it landed in the mail box. I was out in the shop welding stainless car wash components and went right back to work using this instead of the wireless pedal..its gonna be great in so many areas I end up in..no more gorilla taping the pedal to whatever is near by.."
------------------------------------------------------------------
"So I've put this thing through some work, it has performed amazingly! Cannot thank you enough for this creation."
------------------------------------------------------------------
"So you asked for thoughts on the finger pedal. I have used it a couple weeks now and for me it has been a game changer. I had back surgery that affected the nerves in my legs and feet. So I had difficulty using the pedal (floor). The slide switch from you was and is a great addition but I still had issues somedays shutting it off mid weld when I tried to adjust it. This finger pedal is the nuts! Works very smooth. I have had zero issues with it. I watched your videos and finally broke down and spent the money for a W310 torch and partnered with the finger pedal it has greatly improved my welds. Only thing I would recommend is it ships with two Velcro hold down straps. Mine came with one and a tie strap. You have a fantastic product here and I would recommend it to anyone that wants or does tig welding."
-Tim
(I immediately sent him a bunch of velcro straps after I was notified, accidents happen. It was supposed to come with two.)
--------------------------------------------------------
"I received my finger petal and love it! Nice sturdy quality piece., Very responsive and it is just like using my foot petal. This is going to be awesome when we are welding roll cages in our race cars."
Thanks,
Brian
-----------------------------------------------------------------
"I’ve used the finger pedal on several steel and aluminum jobs, and it is awesome. It works exactly like you’d expect. It’s responsive and predicable. I love it. Well done. The only thing I would possibly change is having some grooves machined on the outside corners to help retain the velcro straps. I find that several times during the day I have to move both the front and rear strap back into position. Not a huge deal, but it would be nice if they stayed in place.
Thanks again for coming up with this. It’s made welding much easier."
-Donovan
---------------------------------------------------------------
"Just what I wanted !I haven't had a chance to use it very much but this thing performs exactly as you would think that it should. Fits perfectly on a WP-20 torch and right now I have the finger pedal mounted in the " conventional " way ( using my pointing finger with finger pedal facing away from work ). I am going to remount it so that it is triggered with my " little" and "ring" fingers. ( Finger pedal facing toward the work) to see how it feels.I wish I could offer a more in depth evaluation but I'm also learning with a new welding machine at the same time.
This thing is awesome !!!! Well done !!!!!Thanx..........Dan"
---------------------------------------------------------------
"We have the Finger Pedal installed on our Lincoln Aspect 375. I have run a few beads. Very impressed with the performance. Broader range of control and very linear response.The Finger Pedal matches the grooves on our 20H-320 torch, providing a very stable platform. I also used zip ties to mount it to the torch. I don't want the FInger moving, especially when doing overhead SS exhaust system tacking.
Good job. The button was not bad, but the Finger Pedal is great."
-David
--------------------------------------------------------------
"I just wanted to get back to you and let you know that the finger pedal is awesome, I was able to use it on some repair work for my dad’s trailer, crouching down & not having to worry about losing my balance with the foot pedal was definitely a game changer & with only being allowed to do MiG at my current job, I loved it. Thank you very much for your customer support & I hope you have a great day!"
--------------------------------------------------------------
"I wanted to let you know I received the finger pedal a few weeks back and have had the opportunity to use it now on a few projects and I love it. I wish you would have come up with this years ago when I was pipe welding on the daily. Thank you for coming out with this product. BTW I created a reel on Instagram that’s doing pretty well with over 22k views. You should check it out. "
Thank you,
Robert
------------------------------------------------------------
"I plugged it in yesterday and used it as soon as i got it out the box. I used zip ties to mount it but wasn’t sure if you had sent a better method. The pedal works as it should I think, considering it’s my first hand control at I’m not to familiar with how exactly it should or shouldn’t work. All that said I have been using it and I think it’s working fine, will let you know in the next couple uses if I notice anything weird. It really is such a badass product man in looking forward to get really dialed with it , I think this is such a game changer for my tig welding. Thank again for getting back to me and making this sweet hand pedal!"
-----------------------------------------------------------
"Impressions - ABSOLUTELY love this thing!!!! Great job!! Super smooth controls. I feel that the spring rate you chose is absolutely perfect. I have had the tig control for a few years now, and I just feel like it is too vague for me. I also find that I am probably putting too much pressure on the button itself which causes my hand to shake more. With the finger pedal, it is so much more controllable in my opinion, and having the physical movement allows for much better control.
Regards,
Delevan"
----------------------------------------------------------